No.1 Flange Angle / Furring Channel
We produce and supplies Flange Angle in difference size such as 30mm, 33mm and 34mm which is specially designed for plaster and gypsum ceiling board framing suitable for residential or commercial applications.
Flange Angle are framing component used to furr out masonry walls and ceiling assemblies. In concrete wall applications, Flange Angle is installed vertically to the wall surface using concrete nails or power-drivenfasteners.
With the user-friendly design, our Flange Angle are come with certain feature and benefit as below:
- Provides easy installing furring for interior and exterior walls
- Wide knurled face prevents screw “ride” and facilitates easy installation.


No.2 Metal Stud / Partitions
Popular choice for Partition installation
Thickness | Width | Height | Length |
---|---|---|---|
Thickness 0.30 mm | Width 41 mm | Height 23 mm | Length 8 FT / 9 FT / 10 FT |
Thickness 0.30 mm | Width 41 mm | Height 23 mm | Length 8 FT / 9 FT / 10 FT -N |
Thickness 0.35 mm | Width 41 mm | Height 23 mm | Length 8 FT / 9 FT / 10 FT |
Thickness 0.35 mm | Width 41 mm | Height 23 mm | Length 8 FT / 9 FT / 10 FT -N |
Thickness 0.35 mm | Width 47 mm | Height 25 mm | Length 8 FT |
Thickness 0.35 mm | Width 50 mm | Height 25 mm | Length 8 FT |
Thickness 0.35 mm | Width 41 mm | Height 19 mm | Length 8 FT |


No.3 Suspension Ceiling System
HKS Ceiling suspension System are specially designed to meet the most stringent requirements for nowadays complex building. HKS Ceiling Suspension System is comply to JIS and ASTM standard, therefore our system is popularly use in mega building projects for industrial, commercial, institutional and residential.
HKS Suspension Ceiling System are manufactured from high quality Hot-Dipped Galvanized steel with JIS G 3302 Standard and capped with white coated steel sheet (PPGI)
Product : | Main Tee 12′ | Cross Tee 4′ | Cross Tee 2′ | Wall Angle 10′ |
---|---|---|---|---|
Product : Thickness: | Main Tee 12′ GI: 0.30mm +/- 0.03mm | Cross Tee 4′ GI: 0.30mm +/- 0.03mm | Cross Tee 2′ GI: 0.30mm +/- 0.03mm | Wall Angle 10′ GTW: 0.35mm +/- 0.03mm |
Product : Finishing: | Main Tee 12′ White Coated | Cross Tee 4′ White Coated | Cross Tee 2′ White Coated | Wall Angle 10′ White Coated |
Product : Standard: | Main Tee 12′ 3660mm | Cross Tee 4′ 1220mm | Cross Tee 2′ 610mm | Wall Angle 10′ 3048mm |
Product : Matrix: | Main Tee 12′ 3600mm | Cross Tee 4′ 1200mm | Cross Tee 2′ 600mm | Wall Angle 10′ 3048mm |
Product : Height: | Main Tee 12′ 33mm | Cross Tee 4′ 26mm | Cross Tee 2′ 26mm | Wall Angle 10′ 23mm |
Product : Width: | Main Tee 12′ 25mm | Cross Tee 4′ 25mm | Cross Tee 2′ 25mm | Wall Angle 10′ 23mm |
Product : Packing /Pack: | Main Tee 12′ 20 pcs | Cross Tee 4′ 60 pcs | Cross Tee 2′ 60 pcs | Wall Angle 10′ 50 pcs |
Product : Weight /Carton: | Main Tee 12′ 24 +/- KG | Cross Tee 4′ 21 +/- KG | Cross Tee 2′ 10 +/- KG | Wall Angle 10′ 25 +/- KG |

No.4 Metal Door Frame
Why Choose Us?
All HAI KANG STEEL metal frames, bearing the HAI KANG STEEL hallmark of quality and reliability, are fully ensured of all the following economical, constructional & engineering advantages:
- Higher cost effectiveness or more economical than timber frames
- Environment friendly, 100% recyclable
- Will not wrap, shrink, distort, rot or be damaged by pest attacks
- Fast & simple installation
- Lightweight & easy transportation
- Aesthetical with built in architraves hinges
- Come with hinges, striker plate & lock pocket and shock absorbing buffers
- Forming an integral part of the wall & enhance its structural strength
- Provide a smooth, clean & neat finish to brickwork
- No additional surface preparation & readily paintable

No.5 Metal Window Frame
Why Choose Us?
- Adjustable Louver Window Frame (single or multiple bays)
- Fixed Louver Window Frame (single or multiple bays)
- Adjustable & Fixed Louver Combination Window Frame (single or multiple bays)
- Casement Window Frame
- Top Hung Window Frame
- Casement & Top Hung Combination Window Frame
- Door & Window Combination Frame


No.6 Sheet Piles Services
We can accommodate, and has the resources and ability to take any sheet piling project, no matter is a single bore pit or sheeting in multiple locations over a large spread.
For more information, may visit https://hksteel.com.my/